Linear Technology Corporation introduces the LTC2944 multicell battery monitor, which makes direct measurements of 3.6V to 60V battery stacks. Absolutely no level shifting circuitry on the supply and measurement pins is required to interface with multicell voltages, so total current consumption is minimized and measurement accuracy is preserved. The LTC2944 is a true high voltage battery monitor that measures charge, voltage, current and temperature to 1% accuracy, the essential parameters required to accurately assess battery state of charge (SoC).
The LTC2944 is ideal for multicell applications, including electric vehicles, ebikes/motorcycles/scooters, wheelchairs, golf carts and battery backup systems. Battery current is measured by monitoring the voltage across an external, high side sense resistor and integrating this information to infer charge. A bidirectional analog integrator accommodates either current polarity (battery charge or discharge), and a programmable prescaler supports a wide range of battery capacities. Charge, voltage, current and temperature information are communicated to the host system over an I²C/SMBus-compatible 2-wire interface that is also used to configure the battery monitor. The host can program high and low thresholds for all measured parameters, which if tripped, signal an alert using either the SMBus alert protocol or by setting a register flag.
The LTC2944 is offered in commercial and industrial versions, supporting operating temperature ranges from 0°C to 70°C and –40°C to 85°C, respectively. The LTC2944 is available today in a small RoHS-compliant, 8-pin 3mm x 3mm DFN package.Pricing starts at $2.85 each in 1,000-piece quantities. Please visit www.linear.com/product/LTC2944 for more product selection and information.
60V Battery Monitor for
Multicell Battery Systems
Summary of Features: LTC2944
Entitle is a pioneering privilege management solution that discovers, manages, and automates just-in-time (JIT) access and modern identity governance and…
Available freely to Samtec customers under NDA, SIBORG (Signal Integrity Breakout Region Guru) works with Ansys HFSS 3D Layout to…
Entire NR1 system purpose-built for a more affordable AI infrastructure allowing for faster deployment; furthering AI’s reach into more parts…
Following rapid growth in its customer base to over 400, funding will fuel further AI development and create a hybrid…
The addition of EA’s high-efficiency regenerative power supplies greatly expands Tektronix’s trusted offering Tektronix, Inc, a leading provider in test…
Melexis reveals its groundbreaking Induxis® switch, the MLX92442. Contactless, magnet-free, and strayfield immune, this monolithic solution directly detects conductive targets.…