Categories: Components

40VIN, 2A Silent Switcher µModule Regulator in 6.25mm x 4mm BGA Package

MILPITAS, CA & NORWOOD, MA – October 12, 2017 – Analog Devices, Inc., which recently acquired Linear Technology Corporation, announces the LTM8063, a 40VIN, 2A µModule® step-down regulator in a tiny 6.25mm x 4mm BGA package. The package size is 75% smaller than the existing equivalent product. With two 0805 size capacitors and two 0603 size resistors, the solution is only 70mm². The Silent Switcher® architecture minimizes EMI emissions, enabling the LTM8063 to pass the CISPR 22 class B EMC standard.

The LTM8063 can deliver 2A (2.5A peak) of continuous output current from 12VIN to 5VOUT at an ambient temperature of 85°C. Its 40V input voltage allows it to safely operate from unregulated or fluctuating 12V to 24V input supplies in noisy environments such as avionics, factory automation and industrial robotics. The output voltage is adjustable with one resistor from 0.8V to 15V. This wide output voltage range provides the versatility of using one product to generate low voltage rails such as I/O and auxiliary voltages of digital ICs and common system bus voltages of 3.3V, 5V and 12V.

The switching frequency can be set by an external single resistor ranging from 200kHz to 2.2MHz or can be synchronized to an external clock. The LTM8063 has four operating modes: Burst Mode® operation, pulse-skipping mode, pulse-skipping mode with spread spectrum modulation and external sync mode. The combination of Silent Switcher architecture, wide operating frequency range, and multiple operating modes minimizes the risk of electromagnetic interference, ideal for noise- sensitive signal processing applications including imaging and RF systems.

The LTM8063 operating temperature range is –40°C to 125°C. 1,000-piece pricing starts at $6.95 each. For more information, visit www.linear.com/product/LTM8063.

Summary of Features: LTM8063

Low Noise Silent Switcher® Architecture
Wide Input Voltage Range: 3.2V to 40V
Wide Output Voltage Range: 0.8V to 15V
2A Continuous Output Current, 2.5A Peak
Selectable Switching Frequency: 200kHz to 2.2MHz
External Synchronization
Programmable Soft-Start
Tiny, Low Profile 6.25mm × 4mm × 2.22mm RoHS Compliant BGA Package

Pricing shown is for budgetary use only and may differ due to local duties, taxes, fees and exchange rates.

Liat

Comments are closed.

Recent Posts

BeyondTrust Acquires Entitle, Strengthening Privileged Identity Security Platform with Paradigm Shifting Just-in-Time Access and Identity Governance

Entitle is a pioneering privilege management solution that discovers, manages, and automates just-in-time (JIT) access and modern identity governance and…

2 weeks ago

Samtec Introduces SIBORG Tool to Speed Component Launch Designs

Available freely to Samtec customers under NDA, SIBORG (Signal Integrity Breakout Region Guru) works with Ansys HFSS 3D Layout to…

2 weeks ago

Accelerating Mass Business AI Adoption: NeuReality Launches Developer Portal for NR1 Inference Platform, Expanding Affordable AI Access

Entire NR1 system purpose-built for a more affordable AI infrastructure allowing for faster deployment; furthering AI’s reach into more parts…

2 weeks ago

Dot Compliance Raises a $17.5 Million Up-Round in Series B Extension Funding to Advance New Category of AI-driven Compliance

Following rapid growth in its customer base to over 400, funding will fuel further AI development and create a hybrid…

2 weeks ago

Tektronix and recently acquired EA Elektro-Automatik now offer expanded power portfolio for engineers who are electrifying our world

The addition of EA’s high-efficiency regenerative power supplies greatly expands Tektronix’s trusted offering Tektronix, Inc, a leading provider in test…

2 weeks ago

Melexis unveils fully integrated inductive switch

Melexis reveals its groundbreaking Induxis® switch, the MLX92442. Contactless, magnet-free, and strayfield immune, this monolithic solution directly detects conductive targets.…

2 weeks ago