Categories: Components

Low ohmic value current sensing resistors from TT Electronics reduce design footprint

Proprietary technology enables very low resistance values

Woking, UK, 5 October 2016 – TT Electronics, a global provider of engineered electronics for performance critical applications, today launched the LCS series of thin film resistors.  For sensing and measurement of DC and AC currents in the sub-3A range, the resistors bring precision thin film resistor performance into the field of low ohmic values for use in very accurate current sensing applications.  Most thin film chips have a minimum value in the range of one to 10Ω, but TT Electronics’ LCS series uses a proprietary technology to extend this down to 100mΩ.  The resistors also feature low sensitivity to temperature variations.

Aimed at designers of power supplies, battery monitoring, process control and point of load converters, the LCS resistors will find acceptance for use in market sectors such as industrial, medical, instrumentation and IT.

The resistors offer a level of precision of ±0.5% and ±50ppm/°C, providing higher precision and temperature stability of current measurement.  While there are currently a few thin film chip products below one ohm that use the nickel phosphorus material traditionally used for low value films, TT Electronics’ proprietary LCS film system delivers lower TCRs (temperature coefficient of resistance) in the hundreds of milliohms range.

Available in five sizes from 0603 to 2512, LCS resistors feature high power ratings, e.g. 1W for 2512, which is comparable to thick film ratings.  This also enables smaller footprints to be used.  Enhancing reliability and reducing field failures in industrial applications, LCS also feature anti-sulphur terminations.

A major factor driving the demand for this type of product is the growth of battery powered equipment.  The proprietary thin film technology of TT Electronics’ LCS bridges the gap between the ohmic values offered by bulk metal chips and those of conventional nichrome thin film chips. Whilst thick film chips are also available in this very low ohmic range, LCS offers superior precision, offering the lowest TCR for precision current sensing available in the 0.1 to 1 Ω range.

LCS series resistors are available from the following distributors: Mouser, Newark, and Farnell. For other franchised distributors, please see https://www.ttelectronicsresistors.com/sales.php.

For sales or technical information, contact stephen.oxley@ttelectronics.com or visit www.ttelectronicsresistors.com.

For further information about TT Electronics visit https://www.ttelectronics.com.

Liat

Comments are closed.

Recent Posts

BeyondTrust Acquires Entitle, Strengthening Privileged Identity Security Platform with Paradigm Shifting Just-in-Time Access and Identity Governance

Entitle is a pioneering privilege management solution that discovers, manages, and automates just-in-time (JIT) access and modern identity governance and…

2 weeks ago

Samtec Introduces SIBORG Tool to Speed Component Launch Designs

Available freely to Samtec customers under NDA, SIBORG (Signal Integrity Breakout Region Guru) works with Ansys HFSS 3D Layout to…

2 weeks ago

Accelerating Mass Business AI Adoption: NeuReality Launches Developer Portal for NR1 Inference Platform, Expanding Affordable AI Access

Entire NR1 system purpose-built for a more affordable AI infrastructure allowing for faster deployment; furthering AI’s reach into more parts…

2 weeks ago

Dot Compliance Raises a $17.5 Million Up-Round in Series B Extension Funding to Advance New Category of AI-driven Compliance

Following rapid growth in its customer base to over 400, funding will fuel further AI development and create a hybrid…

2 weeks ago

Tektronix and recently acquired EA Elektro-Automatik now offer expanded power portfolio for engineers who are electrifying our world

The addition of EA’s high-efficiency regenerative power supplies greatly expands Tektronix’s trusted offering Tektronix, Inc, a leading provider in test…

2 weeks ago

Melexis unveils fully integrated inductive switch

Melexis reveals its groundbreaking Induxis® switch, the MLX92442. Contactless, magnet-free, and strayfield immune, this monolithic solution directly detects conductive targets.…

2 weeks ago