NEW PRODUCTS

TCI line Conduction-cooled 130 to 500 Watt encased AC/DC power supplies for industrial applications

  • Conduction cooled design approach
  • Fanless operation with up to 100% output power
  • Operating temperature range –30°C to +80°C
  • I/O reinforced isolation 4250 VAC
  • Over voltage category (OVC III)
  • High efficiency up to 94%
  • Operating up to 5000 m altitude
  • Internal EN 55032 class B filter
  • Protection class II prepared
  • 3 year product warranty

The TCI 130, TCI 240, and TCI 500(U) are three conduction cooled AC/DC encased power supplies series between 130 and 500 Watt with a 4250 VAC reinforced isolation system. Traco Power’s new TCI line focuses on maximizing the proficiency of conduction cooled systems as it offers superior temperature behavior when mounted on a metal chassis or baseplate. This way the TCI can deliver up to 100% of the maximum output power without the need for a fan.

Excellent efficiency of up to 94% allows the TCI series to operate from –30 to +50°C without derating, while going up to +80°C with either load derating or forced cooling. They also meet OVC III requirements and can operate at up to 5000 m altitude. Active power factor correction, EMC characteristics dedicated for applications in industrial/automation and test & measurement.


Danit

Recent Posts

AlixLabs Begins imec Pilot-Line Evaluation of Atomic-Layer Pitch Splitting

The Swedish semiconductor-equipment company has started a six-month assessment of its advanced patterning process within…

20 hours ago

Leica and Cognex Add Local AI Defect Detection to Industrial Microscopy

Aivaro AI Feature Detection identifies, classifies and measures defects inside Leica’s Enersight inspection environment without…

20 hours ago

Renesas Unveils Industry’s First 650V GaN in Dual-Side Cooled 8x8mm Package for Megawatt-Scale AI Data Centers

Dual-side cooling (DSC) shrinks package footprint by 57% compared with TOLT, packing more power into…

5 days ago

Leica Microsystems launches AI software module for consistent inspection decisions

Supporting manufacturers with reliable defect identification and scalable quality control across production lines Leica Microsystems,…

5 days ago

Teradyne Introduces Near-DUT Test Platform for LPDDR6, DDR6 and GDDR7

The Magnum E2 system supports emerging DRAM and NAND interfaces while using common hardware and…

5 days ago

ARX Robotics and DEUTZ Deliver First Ulm-Built GEREON UGVs to Ukraine

The first unmanned ground systems left the production line only 12 weeks after the two…

5 days ago